background image

12 

 

 

Warranty Information

 

 

 

This  warranty  applies  to  (a)  products sold directly by  Novatel  Wireless,  unless  a  different  warranty  is 

specified in a written agreement between Novatel Wireless and the purchaser; and (b) products sold to 

end users through a distributor authorized by Novatel Wireless, but only where the authorized distributor 

does not provide a separate warranty on such products, and Novatel Wireless has agreed to provide this 

warranty to such end users. If you purchased the product from an authorized distributor, please check 

whether this warranty from Novatel Wireless, or a separate warranty from the distributor, applies to 

your purchase. This warranty does not apply to any (i) accessories or batteries for the products; or (ii) 

demonstration samples or prototypes of the products. Unless otherwise provided in a written agreement 

between Novatel Wireless and the purchaser, all such accessories, batteries, samples or prototypes are 

provided by Novatel Wireless AS IS without any warranty of any kind. 
Novatel  Wireless  warrants to the original  purchaser of the product from Novatel Wireless  or  its 

authorized distributor (as applicable) that, for a period of one (1) year from the date of shipment of the 

product from Novatel Wireless, the product hardware will be substantially free from defects in material or 

workmanship under normal operation, and the product firmware will perform substantially in accordance 

with the product documentation provided by Novatel Wireless. Novatel Wireless does not warrant that 

(a) the product hardware or firmware will meet the purchaser's requirements; (b) the operation of the 

product hardware or firmware will be uninterrupted or error-free; or (c) the product, when integrated in, 

or combined with, other products or software not supplied by Novatel Wireless, will continue to perform 

substantially in accordance with the product documentation. This limited warranty is for the benefit of the 

original purchaser, and is not transferable. 
During the warranty period, Novatel  Wireless, at its expense  and  in its sole discretion, will repair the 

product, or replace the product with a corresponding or equivalent product, if it is determined to have a 

covered  defect, provided that the purchaser first notifies  Novatel  Wireless  (directly  or through its 

authorized  distributor from which the product was purchased) of any such defect, furnishes Novatel 

Wireless with a proof of purchase (if required), requests and obtains a return merchandize authorization 

(RMA) number from Novatel Wireless, and returns the product under that RMA to Novatel Wireless (or, 

at Novatel Wireless's option, to its authorized  distributor), with the shipping charges  being prepaid by 

purchaser. If, upon reasonable examination of the returned product, Novatel Wireless  does  not 

substantiate the defect claimed by purchaser, or determines that the defect is not covered under this 

limited warranty, Novatel Wireless will not be required to repair or replace the product, but may instead 

reship the product to the purchaser (or, at Novatel Wireless's option, to its authorized distributor where 

the product can be made available to purchaser), in which case the purchaser shall be responsible for 

paying  Novatel  Wireless's  cost  for  reshipping  the product to purchaser (or to Novatel Wireless's 

authorized distributor), and Novatel Wireless's usual charges for unpacking, testing, and repacking the 

product for reshipment to purchaser (or to Novatel Wireless's authorized distributor). Purchaser shall bear 

the risk of loss or damage in transit to any product returned by purchaser to Novatel Wireless, or any 

returned product not found to be defective or covered under this warranty, and reshipped by Novatel 

Wireless  to purchaser (or to Novatel Wireless's authorized distributor).  In  the  event  Novatel  Wireless 

repairs  or  replaces  a  defective  product covered by  this  limited warranty, the repaired  or  replacement 

product will be covered under this limited warranty for the remainder of the original 

Содержание SA 1100


























Отзывы: