Novatel MiFi 4620L Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 79

background image

66

Regulatory Statements

Federal Communications Commission Notice (FCC – United States)

Electronic devices, including computers and wireless modems, generate RF energy incidental to their
intended function and are therefore subject to FCC rules and regulations.

This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential environment.

This equipment generates radio frequency energy and is designed for use in accordance with the
manufacturer’s user manual. However, there is no guarantee that interference will not occur in any particular
installation. If this equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment of and on, you are encouraged to try to correct the interference by
one or more of the following measures.

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is
subject to the following two conditions.

•

This device may not cause harmful interference.

•

This device must accept any interference received, including interference that may cause undesired
operation.

WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION
MAY VOID THE WARRANTY. THE MiFi 4620L MODEM IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR
TUNING IS REQUIRED. CONTACT NOVATEL WIRELESS TECHNICAL SUPPORT FOR INFORMATION ABOUT
SERVICING YOUR WIRELESS COMMUNICATION DEVICE.

FCC CAUTION

: An

y changes or modiication not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

MODIFICATIONS:

The FCC requires that you be notiied that any changes or modiications made to this

device that are not expressly approved by Novatel Wireless, Inc. may void your authority to operate the
equipment.

NOTE:

The Radio Frequency (RF) emitter installed in your modem must not be located or operated in

conjunction with any other antenna or transmitter, unless speciically authorized by Novatel Wireless
Technologies.

«
...
68
69
70
71
72
...
»

Содержание MiFi 4620L
















































































Отзывы:

Нет отзывов

Похожие инструкции для MiFi 4620L

Бренд: Ubiquiti Страницы: 22

AirStation Nfiniti WZR-AG300NH

Бренд: Buffalo Страницы: 48

Бренд: TP-Link Страницы: 2

Бренд: Moxa Technologies Страницы: 17

AWK-3121B Series

Бренд: Moxa Technologies Страницы: 14

Бренд: Ajoho Страницы: 24

Бренд: Accton Technology Страницы: 107

Бренд: LogiLink Страницы: 9

Бренд: Vivato Страницы: 181

Бренд: Ijinus Страницы: 9

4G MY POCKET WI-FI PLUS

Бренд: Telstra Страницы: 29

Бренд: Laird Страницы: 53

Бренд: 4gon Страницы: 64

Бренд: RFNet Страницы: 36

USB 10/100 SW-U-EU1

Бренд: Swann Страницы: 2

Бренд: Alpha IP Страницы: 64

Бренд: H3C Страницы: 137

Бренд: 1More Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды