Installing Mobile Connect for Windows
Insert your Turbo Stick into an available USB port on your computer. Do
not forcibly insert your Turbo Stick as this may damage both the device
and the port. Your Turbo Stick powers on when inserted, and your
computer may beep.
Note:
Your computer may display a security warning stating that Mobile
Connect is not a trusted application. You may safely dismiss this warning
and continue with the installation.
Installation should automatically begin. However, you may be prompted to
install Mobile Connect. Select
Install/Run Mobile Connect
.
If the auto install fails to start, remove your Turbo Stick and use an
alternate Internet connection to download and install the software from
our website at
bell.ca/mobileconnect
before inserting your Turbo Stick, or
you can manually install the software from your Turbo Stick by:
1. Selecting Start > Run > Browse...
2. Look in “My Computer” to find your Turbo Stick disk drive
3. Run the file “mobileconnect.exe”
Note:
The drive letter assigned to your Turbo Stick by the computer’s
operating system will be the next available drive letter (e:\, f:\, g:\, etc.).
9
