MX40 Pro LED Display Controller User Manual
www.novastar.tech
17
On the main menu screen, choose
Advanced Functions
>
Output Settings
.
Figure 6-17 Low latency
Perform any of the following operations as required.
Enable low latency
Set the
Low Latency
switch to
to enable the low latency function.
Set additional frame delay
a.
Select
Additional Video Delay
and then the value becomes editable.
b.
Rotate the knob to adjust the parameter to the target value, and then press the knob to confirm.
6.3.5
Set Bit Depth
Set the output bit depth of the input source.
On the main menu screen, choose
Advanced Functions
>
Output Settings
.
Figure 6-18 Bit depth
Select
Bit Depth
and then select the desired bit depth value from the drop-down options.
If
Auto
is selected, the output bit depth is the same as the input bit depth.
6.3.6
Set Sync Source
Select a synchronization signal for the display frame rate and set the phase offset.
On the main menu screen, choose
Advanced Functions
>
Output Settings
>
Synchronization
.
Figure 6-19 Synchronization
Select
Sync Source
and then select the desired sync source from the drop-down options.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
