NOVARDEN NRL630, Руководство пользователя

Страница: 12 / 160

10
Switching on the appliance
EN
Starting the robot mower
Once the robot mower is fully charged, you can start its mowing
cycle from:
• Its charging station.
• The start point selected in the mowing area within the perimeter
cable. This option is only valid if the robot mower remains on
since the last use.
NOTE:
If the robot mower has been switched off between uses, it must be
placed on its charging station before restarting it.
To manually start a mowing cycle:
• Switch on the robot mower. To do so, set the On/Off button to “I”.
• Enter and confirm your PIN code. As a reminder, the default PIN
code is “0000”. You can change it at any time via the control panel
(see page 6).
• Press the START button. The robot will then start its mowing
cycle.
To start an automatic mowing cycle (scheduling):
• Switch on the robot mower. To do so, set the On/Off button to “I”.
• Enter your PIN code. As a reminder, the default PIN code is “0000”.
You can change it at any time via the control panel (see page 7).
• Set the time (see page 7).
• Set the mowing area (see page 8).
• Set the robot mower’s start time (see page 8).
• Press the START button. The robot mower will start its mowing
cycle at the scheduled time.