NovaLynx Corporation_____________________________________________________________________________
200-WS-23
Page 5
Oct 2020
3
SPECIFICATIONS
4
INSTALLATION
Please refer to the 200-WS-02F or 200-WS-01B anemometer user manual for information on
installation and maintenance of the anemometer. Pay particular attention to the location of the sensor
and align the wind vane to North for best results. Route the cable to the location where the transmitter
unit will be installed.
The transmitter enclosure may be mounted to the same mast as the anemometer, or wall mounted in
a convenient location.
200-WS-23:
4-20 mA = 0-100 mph
200-WS-23-M:
4-20 mA = 0-50 m/s
200-WS-23-KM:
4-20 mA = 0-200 kph
200-WS-02F Wind Direction Transmitter
200-WS-23S:
4-20 mA = 0-100 mph
200-WS-23S-M:
4-20 mA = 0-50 m/s
200-WS-23S-KM:
4-20 mA = 0-200 kph
Loop supply voltage range
Connection
Operating temperature range
NEMA enclosure dimensions
Cable to user equipment
Measurement range
Speed Constant
Transducer type
Speed Threshold
Accuracy
Range
Transducer type
Potentiomenter gap
Azimuth accuracy
Threshold
Bearings
Anemometer mount
Anemometer cable (200-WS-02F)
Anemometer cable (200-WS-01B)
General
1.07" dia. (27 mm)
5 conductor, 24 AWG, shielded, 40' (12 m)
2 conductor, 24 AWG, shielded, 40' (12 m)
Potentiometer, 20k ohms, conductive plastic
5 degrees
± 3 degrees
1.2 mph (0.5 m/s)
Bushing
Reed switch
0.8 mph (0.4 m/s)
1 mph or ± 3%
Wind Direction Sensor (200-WS-02F)
0-360 degrees azimuth
200-WS-02F Wind Speed Transmitter
200-WS-01B Wind Speed Only Transmitter
Transmitter Specifications
4-20 mA = 0-360 degrees
8 to 30 Vdc
Screw terminal
-58° to +140° F (-50° to + 60° C)
4.7" x 4.7" x 2.25" (120 x 120 x 57 mm)
Not supplied / order separately
Wind Speed Sensor (200-WS-02F & 200-WS-01B)
0-112 mph (0-50 m/s)
1.25 mph = 1 Hz (0.5588 m/s = 1 Hz)
