background image

6

PIT WIZARD INSTRUCTION MANUAL

• DEADBAND

Measured as  percentage (%) of Full Throttle trigger position.

Space between Minimum Brake and Minimum Drive, with

Neutral located at the center of this space (Figure 2).

Changing the Deadband value will change the point at which

forward Drive begins with respect to Neutral.

Increasing Deadband

 will require more trigger movement away

from Neutral to reach both the first pulse of Drive and the first
pulse of Brake. 

Example: Adding 10% to the value of Deadband

will in turn add 5% Deadband in the Full Throttle trigger
direction, and 5% Deadband in the Full Brake trigger direction.

Decreasing Deadband

 will require less trigger movement to

reach the first pulses of Drive and Brake.

Figure 2:

  Deadband graphically displayed as a percentage of the Full Throttle

trigger position, which is measured in microseconds.

DEADBAND

18%

T R I G G E R         P O S I T I O N

N e u t r a l

F u l l

T h r o t t l e

1 0

1 0

2 0

5 0

1 0 0

2 0

5 0

1 0 0

100%

18%

% FULL DRIVE

% FULL BRAKE

M i n i m u m
D r i v e

M i n i m u m

B r a k e

ADJUSTABLE PARAMETERS

 (CONT.)

Содержание PIT WIZARD



































Отзывы: