ENGLISH
NovaJet PROe Series
Quick Start 17
7
Place the suction end of the NovaPrime over the jet area of the cartridge.
8
Make sure the NovaPrime is making good contact with the jet area. Pulse
the pump 3 - 5 times, until the ink is visible in the NovaPrime sight tube,
maintain good contact between the inkjet plate and the pump for an addi-
tional 5 seconds.
When removing the NovaPrime, use the silicone tip to wipe and clean the jet
plate. Remember to clean the silicone tip of ink before moving to the next
cartridge.
9
Check that there are no twists in the ink delivery line.
Check for ink on the jet plate. Continuous bleeding of the jet plate indicates a
loss of vacuum in the cartridge or an air leak in the lines. Correct this before
proceeding.
10
Insert the cartridge into the carriage.
