image 5
image 6
image 7
image 8
Attaching the Bag
Step 1:
Place the bag between the legs of the walker so that the narrow closed end is facing forward.
Step 2:
Place the left side top fl ap over the frame just above the folding hinge support piece and snap both
buttons in place. Repeat this for the upper right top fl ap
(see image 6)
.
Step 3:
Place the lower left fl ap around the rear frame tube and snap both buttons in place. Repeat this
step for the right side lower fl ap
(see image 7)
.
Attaching the Basket and tray
Step 1:
Position the basket between the cables and above the hooks located on the frame in front of the
handles
Step 2:
Slowly lower the basket until the hooks engage into the corner squares on the diagonal slope. The
folding hinge piece will fi t inside of the large cut out on the diagonal slope if the basket is place correctly
(see image 8)
.
Step 3:
Remove the tray from the protective box and place on top of the basket.
Step 4:
Your walker is now completely assembled
(see image 9)
.
How to Open:
Step 1:
Push outward on the frame or handles
(see image 10).
Step 2: P
ush down on the black hinge piece with caution markings until the frame is in the full open and
locked position
(see image 11).
How to Fold:
Step 1:
Remove the basket if attached.
Step 2:
Slowly pull back on the black hinge piece with caution markings until the hinges are no longer in a
straight position.
Step 3:
Push inward on the handles until the walker is in the folded position.
image 10
image 11
image 9
