Nova Technology International, LLC Standard Profile Truck Lock Series, Инструкция для владельца и пользователя

Страница: 53 / 88

51 Manual No. NT-0-350 - Rev. May 2021
NOVA Truck Lock ™ Standard Profile Manual
WARNING
Visually inspect to ensure that the Truck Lock ™
vehicle restraint Ram bar captures the RIG of the
trailer before operating the dock leveler.
3P. RESTRAIN Position (No RIG Sensor)
a. RIG is securely captured by the Ram bar, a RESTRAIN condition exists.
b. The GREEN light on the control box is flashing, alerting the fork lift operator a safe condition exists.
c. The outside RED light is flashing, alerting transport vehicle driver not to move.
OPERATING PROCEDURES
FIGURE CO
—
RESTRAIN POSITION
4P. RELEASING Restraint (No RIG Sensor)
• If the control box is not interlocked, skip step “a” below:
• If the control box is interlocked, perform step “a” below:
a. Interlocked equipment must be in position listed below:
PLC Display: Interlock Door A Door must be closed
OR
PLC Display: Interlock Door B Door could be opened or closed
OR
PLC Display: InterlockLeveler Leveler must be stored
b. Depress “RELEASE” (#7 button).
c. The RED light on the control box is flashing, alerting fork truck driver an unsafe condition exists.
d. The outside RED light is flashing, alerting transport vehicle driver not to move.
e. When the process is complete, the Ram bar is in the RELEASE position shown in Figure CL, Page 49.
FIGURE CP — RELEASING RESTRAINT
GREEN LIGHT
FLASHING
RED LIGHT
FLASHING