◼
Please use qualified safety-rope, which can hold at least 10 times the weight of the fixture.
You must only use safety-ropes with quick links with screw cap. Pull the safety-rope
through the hole on the bottom of the base and over the trussing system etc. Insert the
end in the quick link and tighten the fixation screw. A safety rope which already hold the
strain of a crash or which is defective must not be used again.
2.
Dmx512 connection
◼
Please use xlr-xlr wires connect the dmx output the controller withe the dmx input of the
first device, and connect the dmx output of the first device with the dmx input of the second
device, always connect one output with the input of the next device until all devices are
connected.
3. Connection with mains
The person involved with the power connection must be qualified, and has the electrical
engineering certificate.
Connect the device to the mains with the power plug.
The earth has to be connected.
Power consumption 200w, input power supply AC100V-250V, 50HZ/60HZ.
4.
The use of gobo frame
Take out the gobo frame, loose the screws, insert the gobos and lock
◼
the screws again.
◼
Insert the gobo in the slot.