background image

ARRI 3

 

LED Spotlight - 24VDC

415-504-3536

415-504-3534  INS-ARRI 3  8/17/18    

•     

•     

www.teganlighting.com

1

[email protected]

Tegan Trac

Installation Instructions

ARR

I 3 Ov

er

vi

ew

Saf

et

y Ins

tr

uc

tio

ns

ARRI 3

1. CAUTION: Read all instructions.

•   Do not install any Spotlight closer than six inches from any curtain or similar combustible material.
•   Do not install this system in a damp or wet location.

•   Turn off electrical power before modifying the lighting system in any way.

•   Ensure the Spotlight connector is attached correctly to the system with no cross threading and is tightened down completely to make contact
      with the top of the track.
•   Ensure all connections are tight. Loose connections can cause overheating, arcing and a potential fire risk.
•   Use only as described in these Tegan Lighting Installation Instructions.
•   Use only Tegan Lighting supplied accessories.
•   Luminaires may be extremely hot, allow to cool before touching.
•   These are 24VDC Spotlights; they must be connected to an appropriate 24VDC power supply. Refer to Specification Sheets.
•   For proper installation, have a qualified electrician install this product.
•   This luminaire must be wired and grounded in accordance standard accepted electrical installation practices, local codes, and ordinances.
•   Wire supply connections must be made with U.L. or comparible testing agency-approved connectors.

•   Regular cleaning of these products is important. Switch off at main supply and allow to cool before touching. Clean fittings with a soft damp

      cloth and allow to dry before reconnecting power supply.

Reviews: