background image

 

device. 
Unpack your led profile spot 
Delivery includes 
Gobo frame: 1PC        Color frame: 1PC          USER MANUAL: 1PC 

DESCRIPTION OF THE DEVICE. 

1.

Profile 

With the idea of energy saving and environment protection, the device use low power loss and 
extremely high efficiency led. The device housing cover is made of used the new high strength 
heat resistance engineering plastics, with beautiful shape and smooth lines. The designing and 
manufacturing is in compliance with the IEC standard. The device is suitable in the large-scale 
theatrical performance, the theater, the performance hall, the bar, nightclub and so on. 
The product conforms to the international standard DMX512 agreement completely, the device 
can be controlled in signal, and also be controlled in many units. 

2.

  Specification 

Lamp: 200w warm white/white led. 
Power Supply: AC100V-250V, 50HZ/60HZ 
Power consumption: 200w 
2DMX control channels 
Small volume, light weight 
High quality optical system 
Different lens available (19°/26°/36°/50°) 
N.W.:9.5kgs, 

3. Photographic chart 

         

 

 

4. Safety warning 

 

Warning: 

 

    Every person involved with the installation, operation and maintenance of this device 
has to be qualified. 

 

User must follow the instructions of this manual. 

 

Unqualified person cannot open the housing cover and operate the device, or the dealer 
will not accept liability for any resulting defects or problems. 

 

The device against rain and moisture. 

Содержание SOLAR PRO 200 TW









Отзывы: