15
The following things should be checked before starting the dishwasher.
Syphon Connection
The waste connection must be at a height of between 40 cm (minimum) and 100 cm (maximum)
from the bottom of the dishwasher. The water drain hose should be fixed by a hose clip.
After installation, please make sure to keep this manual
in a safe place for future reference
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres; otherwise wash performance may be negatively affected.
1
The dishwasher is level and fixed properly
2
The inlet valve is open
3 There is no leakage near the power connection
4
The wires are tightly connected
5
The power is switched on
6
The inlet and drain hoses are not knotted
7 All packing materials
from the dishwasher
have been removed
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
Ensure that the water inlet hose is not kinked or squashed.
If the sink is 1000mm higher from the floor, the excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable
container that is held outside and lower than the sink.
How to Drain Excess Water From Hoses
Cabinet installation
When installing the dishwasher into cabinetry, be sure to observe the minimum space requirements as shown
in the below diagram.
Содержание ND60SS
Страница 1: ......
