Nouveau ND60SS, Руководство пользователя

Страница: 13 / 22

10
It is dangerous to open the door when washing, because the hot water may scald you.
When the wash cycle has finished, the then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
dishwasher will beep for 8 seconds
Switch Off the Dishwasher
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
When the cycle has just finished, the Finish light will be on
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down for around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
If you open the door , the machine will pause. The program light will
stop blinking and the buzzer will sound every minute unless you close the door. After
you close the door, the machine will keep on working after 10 seconds.
during a wash cycle
Premise:
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled (see the section entitled "Detergent
).
Press the Start/Reset button for you can
change the program to the desired cycle setting (see the section entitled " Starting a wash cycle
The program lights show the state of the dishwasher:
a) One of the program lights on-----------------------------paused
b) One of the program lights blinking-------------------- -running
c) Some of the program lights quick flashing------------error
"
more than 3 seconds
" ).
-
1
2
3
on page 4
. The machine will enter a standby state, and
When you press the Start/Reset button to pause during washing, the program light will
stop blinking and the dishwasher will sound every minute unless you press the
Start/Reset button to start.
A forgotten dish can be added any time before the detergent opens. dispenser
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little to stop the washing.
1 4
5
6
Press the Start/Reset button
Press the Start/Reset button, the dishwasher will run
after 10 seconds.