
NM
3000
No. 31884 29/05
5
5.3 Operation
The NM 3000 can be operated without a foot pedal, with the on/off foot pedal or with the Vario foot
pedal:
5.3.1 Operation without a foot pedal
Rotational speed:
The
“0 ... 35,000 RPM”
control knob steplessly regulates the desired rotational
speed from 0 to 35,000 rpm.
Direction of rotation
: The
“FORWARD / REVERSE”
switch is used to start the motor and to change
the direction of rotation of the motor:
“FORWARD”
: Motor rotates forwards
Middle position: Motor stationary
“REVERSE”
: Motor rotates backwards
5.3.2 Operation with on/off foot pedal
Foot pedal:
The motor is switched on and off with the on/off foot switch:
Pedal not pressed:
Motor off
Pedal pressed:
Motor
Rotational speed:
The
“0 ... 35,000 RPM”
control knob steplessly regulates the desired rotational
speed from 0 to 35,000 rpm.
Direction of rotation
: The rotational direction of the motor can be changed with the
“FORWARD /
REVERSE”
switch:
“FORWARD”
: Motor rotates forwards
Middle position: Motor stationary
“REVERSE”
: Motor rotates backwards
5.3.3 Operation with Vario foot pedal
Vario foot pedal:
The rotational speed of the motor can be steplessly controlled with the Vario
foot pedal.
Pedal not pressed:
Motor off
Pedal pressed:
Variable rotational speed
Pedal completely pressed: Speed as set on
“0 ... 35,000 RPM”
control knob
Direction of rotation
: The direction of rotation of the motor can be changed with the
“FORWARD /
REVERSE”
switch:
“FORWARD”
: Motor rotates forwards
Middle position: Motor stationary
“REVERSE”
: Motor rotates backwards
5.4 “Overheat” overload protection
If the motor is overloaded, the
“Overheat” LED
illuminates.
If the “FORWARD / REVERSE” switch is not located in the middle position when
the device is switched on, the connected motor starts running automatically
Æ
Æ
Æ
Æ
Risk of injury!
If the “Overheat” LED illuminates, the device must be switched off for at least
10min.
Содержание 306010
Страница 33: ...Anhang Appendi Appendice Appendice Ap ndice ...