
NM 3000
4
No. 31884 29/05
5 Operation
5.1 Operator's controls
Front
Back
Front side:
A)
“Overheat”LED:
Illuminates in the case of motor overload.
B)
“Power” LED:
Illuminates when the device is switched on
C)
“FORWARD / REVERSE” switch:
Adjustment of the direction of rotation: Forwards / Neutral / Backwards
D)
“0 ... 35,000 RPM” control knob:
Adjustment of the rotational speed
E)
“MOTOR” socket
:
Connection of micromotor or motor handpiece
Back:
F)
“FOOT” connector
:
Connection of foot pedal (optional!)
G)
“ON /OFF” switch:
Switching on/off of control device
Æ
illuminates when control device is switched on
H)
“LINE” cable:
Mains supply 115 V~ / 60 Hz or 230 V~ / 50 Hz (see device label!)
5.2 Switch on device
The control device is switched on and off with the
“ON /OFF”
switch (at the back!)
Æ
When the device
is switched on, the
“ON /OFF”
switch and the
“Power” LED
illuminate.
If the “Overheat” LED illuminates, the device must be switched off for at least
10min.
Содержание 306010
Страница 33: ...Anhang Appendi Appendice Appendice Ap ndice ...