
- 9 -
There is a general thermometer function
problem.
The thermometer’s temperature is not with
in the operating range of 16°C to 36°C
“L” - Lower than 16°C (60.8°F)
“H” - Higher than 36°C (96.8°F)
When storing the thermometer in a cupboard
or draw, this error occasionally occurs
because cold air is trapped inside the
cupboard or draw space, regardless of the
outside temperature. Always ensure that the
thermometer is taken out 20 - 25 minutes prior
to use, enabling it to adjust to the room
temperature.
Place the thermometer in a room
with the temperature range of
16°C (60.8°F) to 36°C (96.8°F).
Wait 20 - 25 minutes before taking
a new reading.
Repeat the measurement and wait
for the beep before moving the
thermometer.
Reset the thermometer by pressing
the “Measurement” (fig.1-no.5) and
“Memory” (fig.1-no.2) buttons
simultaneously and keeping them
pressed for 3 seconds. If the
thermometer still does not function,
see page 11, Warranty section for
further information.
Meaning
Display
Action
Repeat the measurement moving
slowly up and down the temple
region up to a maximum distance
of 10cm away from the skin.
The temperature measured is outside the
body temperature range 34.4°C - 42.6°C
(93.4°F - 108.7°F).
The temperature has not been taken correctly.
For example, temperature reading has begun
but the user may have directed the
thermometer out of the recommended area
(eg. directing to the hair), or the speed of
moving the thermometer exceeds the
response speed of the detector therefore
resulting in an erroneous reading.
Troubleshooting