background image

NOTIFIER

®

 warrants its products to be free from defects in materials and workmanship

for eighteen (18) months from the date of manufacture, under normal use and service.
Products are date stamped at time of manufacture.  The sole and exclusive obligation
of 

NOTIFIER

®

 is to repair or replace, at its option, free of charge for parts and labor,

any part which is defective in materials or workmanship under normal use and service.
For products not under 

NOTIFIER

®

 manufacturing date-stamp control, the warranty

is eighteen (18) months from date of original purchase by 

NOTIFIER

®

's distributor

unless the installation instructions or catalog sets forth a shorter period, in which
case the shorter period shall apply.  This warranty is void if the product is altered,
repaired or serviced by anyone other than 

NOTIFIER

®

 or its authorized distributors or

if there is a failure to maintain the products and systems in which they operate in a
proper and workable manner.  In case of defect, secure a Return Material Authorization
form from our customer service department.  Return product, transportation prepaid,
to 

NOTIFIER

®

, One Fire-Lite Place, Northford, Connecticut  06472-1653.

This writing constitutes the only warranty made by 

NOTIFIER

®

 with respect to its

products.  

NOTIFIER

®

 does not represent that its products will prevent any loss by

fire or otherwise, or that its products will in all cases provide the protection for which
they are installed or intended.  Buyer acknowledges that 

NOTIFIER

®

 is not an insurer

and assumes no risk for loss or damages or the cost of any inconvenience,
transportation, damage, misuse, abuse, accident or similar incident.

NOTIFIER

®

 GIVES NO WARRANTY, EXPRESSED OR IMPLIED, OF

MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR
OTHERWISE WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF.  UNDER NO CIRCUMSTANCES SHALL 

NOTIFIER

®

 BE LIABLE FOR ANY

LOSS OF OR DAMAGE TO PROPERTY, DIRECT, INCIDENTAL OR
CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR INABILITY TO USE

NOTIFIER

®

 PRODUCTS.  FURTHERMORE, 

NOTIFIER

®

 SHALL NOT BE LIABLE

FOR ANY PERSONAL INJURY OR DEATH WHICH MAY ARISE IN THE COURSE
OF, OR AS A RESULT OF, PERSONAL, COMMERCIAL OR INDUSTRIAL USE OF
ITS PRODUCTS.

This warranty replaces all previous warranties and is the only warranty made by

NOTIFIER

®

.  No increase or alteration, written or verbal, of the obligation of this warranty

is authorized.

"NOTIFIER"

 is a registered trademark.

Limited Warranty

Technical Publishing

Document WarNBg-F.P65   01/18/2000

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Содержание NOTI-FIRE-NET

























Отзывы: