Notifier INA, Руководство пользователя

Страница: 54 / 80

54 INA 15092:I 05/30/01
The INA will support the installation of optional remote video display terminals and printers.
The CRT Terminal displays all network information. The CRT is provided with a keyboard that can be used to operate the
INA provided the following conditions are met:
• The CRT with keyboard must be located in the same room as the INA.
• When not in use, the keyboard must be removed or it must be locked up.
4.1 P
RINT
F
UNCTIONS
The printer can be used to provide a permanent record of all system events, the local history buffer, or local programming.
Alarms, troubles, and acknowledgments are recorded on the printer as they occur in the system. The CRT and printer will
not function during a primary power failure. For this reason, the use of an uninterruptable power supply (UPS) is recom-
mended.
When printing the local history buffer or local programming, printing will be done out of background until the function is
complete or the operator aborts printing. If an event is received by the INA, it will be printed immediately and no special
attempts will be made to distinguish the new event from the events printed from the local history buffer. New events, should
they occur, will be interspersed throughout the printout. Print functions are accessed by pressing the Special Function key.
SECTION 4 REMOTE PERIPHERALS
PRESS 1=RPTS,2=HIS
:
Press and the display will show:
S (
SPL
FUNCT
After the operator chooses "1" to print reports, the following display will appear:
Choosing 1 for programming, enables the INA to print its local programming information. System programming will print
first, followed by annunciator panel programming and then annunciator point programming. Choosing 2 for alarm or 3
for event history buffer, enables the INA to print out all fire alarms or events stored in the selected buffer, starting with
the first event that occurred. After selecting programming information (1), history alarm (2), or history events (3), the
following screen appears.
Choosing 1 starts the action requested and choosing 2 aborts the action.
PRESS 1=PROG,2=HIS ALARM,3=HIS EVENTS
:1
PRESS 1=REQUEST,2=ABORT
:1
www.PDF-Zoo.com