AFP-3030 Operations Manual —
P/N DOC-01-033:C 05/12/2018
47
Section 5: Printing Reports
A variety of reports can be generated and printed from the AFP-3030. Reports listing all event, alarm, fault, or supervisory history can be
generated from the history screens in Section 4, “Viewing and Printing History Information”, on page 44. The following section
describes how to print programming, Walk Test, and active point information.
5.1 Printer Functions Screen
The following screen displays when the Printer Functions soft key is pressed at the Main Menu. This key will appear only if a printer has
been selected through programming.
Figure 5.1 Printer Functions Screen
Soft Keys
PROGRAMMING: Press this soft key to display the Print Programming Menu screen.
ACTIVE POINTS: Press this soft key to display the Active Points Menu screen.
NOTE:
Report formats are shown below as printed by an 80-column printer. When these reports are printed on a Keltron,
which is a 40-column printer, the formats are the same except they are displayed on two lines instead of one.
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A
T U E J A N 2 9 , 2 0 1 9
P R I N T E R F U N C T I O N S
P R O G R A M M I N G
A C T I V E P O I N T S
I N S T A L L E D P O I N T S
D E T E C T O R M A I N T E N A N C E R E P O R T
B A C K
