Nostalgia Electrics CWF48RR, Инструкция и рецепты

Страница: 7 / 20

E
N
G
LI
S
H
5
PARTS & ASSEMBLY
Your CHOCOLATE WATERFALL requires little assembly. Prior to use,
wipe out Bowl with a damp cloth and dry. Wash Auger, Chocolate
Wall, and Tower Cylinder in warm soapy water, rinse, then dry.
After cleaning, return the Auger to the Base Pin. Place the Tower Cylinder over
the Auger and secure to the Base by aligning with the pins. Then align the hole
of the Chocolate Wall with the Tower Cylinder and place on the base.
Do not attempt to place Auger, Chocolate Wall, or Tower Cylinders on
Base or remove from Base while the motor is running. Make sure the
Tower Cylinders are fitted on the pins in the Base properly.
SWITCH POSITIONS
Left: Heat Motor / Top: OFF / Right: Heat
Auger
Tower
Cylinder
Bowl
Base Pins
Chocolate
Wall
Base