Norton Clipper C1318P, Руководство пользователя

Страница: 20 / 34

20
D. Depth Control
The depth control (raising screw) consists of a threaded rod, which feeds into a
steel nut. In order to keep the two parts working smoothly it is necessary to
keep the rod free from dirt and sludge as much as possible. Cleaning the
threaded rod with a rag after each use will prevent sludge from collecting in the
tube assembly and protect the threads. It is a good practice to keep the raising
screw threads lubricated, as the slurry generated during cutting will cause
premature thread wear.
The bearing used to support the raising screw should be checked after each
use to make sure it is turning freely and lubricated. If the bearing requires re
lubrication lithium base grease is recommended.
F. Inspections and Cleaning
For long life and better machine performance follow the inspection and
cleaning schedule below.
Regular Service Period Preformed
At Every Indicated Period
→
After First Hour of Work Beginning Of Day During Blade Change End Of Day Once A Week After Failure After Damage
Whole Machine
Inspect For Damaged or
Missing Components
X X X X X
Clean
X X
Blade Collars
Clean
X
Belt Tension
Check
X X X X
Water Hose, Water Fittings,
and Nozzles
Clean
X X
Inspect
X X X
Depth Screw
Grease
X
Engine
Clean
X
Reachable Hardware
Tighten
X
Bearings (Blade Shaft and
Depth Control)
Grease*
X
Wheels
Inspect
X X X
Handle Bar Vibration
Reduction System
Inspect
X X X X X
* = See Bearing Maintenance of This Manual Before Greasing
Replace any damaged or missing components before using
machine.