Norton C1320P, Руководство пользователя

Страница: 27 / 44

27
The bearing used to support the raising screw should be checked after each
use to make sure it is turning freely and lubricated. If the bearing requires re
lubrication lithium base grease is recommended.
Over tightening the Hand Wheel during the raising or lowering
the Saw will damage the raise screw or Bearing. The Operator
should stop rotating the Hand Wheel when resistance is felt or
when the machine is raised to its highest position or
completely lowered.
F. Inspections and Cleaning
For long life and better machine performance follow the inspection and
cleaning schedule below.
Regular Service Period Preformed
At Every Indicated Period
→
After First Hour of Work Beginning Of Day During Blade Change End Of Day Once A Week After Failure After Damage
Inspect For Damaged or
Missing Components
X X X X X Whole Machine
Clean
X X
Blade Collars
Clean
X
Belt Tension
Check
X X X X
Clean
X X Water Hose, Water Fittings,
and Nozzles
Inspect
X X X
Depth Screw
Grease
X
Engine
Clean
X
Reachable Hardware
Tighten
X
Bearings (Blade Shaft and
Depth Control(
Grease*
X
Wheels
Inspect
X X X
Handle Bar Vibration
Reduction System
Inspect
X X X X X
* = See Bearing Maintenance of This Manual Before Greasing
Replace any damaged or missing components before
using machine.