Norton C1320P, Руководство пользователя

Страница: 20 / 44

20
Additional Guide Lines For Sawing:

Understand and follow all of the instructions in this owner’s manual.

If wet cutting, turn on the water supply so that there is a minimum of 4-6
gallons per minute of water flow!!

In critically hard aggregate, more than a single pass may be needed to cut
the desired depth.

If the saw stalls in the cut, immediately stop the forward speed and raise
the blade out of the cut. If this is not done the belts can fail or the blade
may be damaged.

Go slowly with a new blade until it opens up, that is, until the diamonds
can be seen and felt.
I. Lead-Off Adjustment
If the saw tends to pull to one side (lead off), it may be steered by applying
slight pressure to the left or right hand handles.