27
02252A-1
12:00
PM
12/25
EDIT AREA CODE
12:00
PM
12/25
HOME AREA
12:00
PM
12/25
LOCAL AREA
USE LED light is on. Press again the PAGE button then release
until the IN USE LED turns off. Now your unit is already reset.
d. EDIT AREA CODE:
There are two sections of area code:
HOME AREA and LOCAL AREA. Home
and Local Area Code need to be programmed
for caller ID dialing back. The Home area code is the same area
code as the line connected to this base unit. The Local area codes
are provided for areas with 10-digits dialing where multiple area
codes are used to serve the calling area. 1 Home area code and 7
local area codes can be programmed into this system.
I. SETTING THE HOME AREA CODE
1. In BASE MENU, press UP or DOWN button to search for "EDIT
AREA CODE".
2. Press OK button to select.
3. Press UP or DOWN button to search
for "HOME AREA".
4. Press OK button to select and the unit asks you to enter the
home area code.
5. Enter the 3 digits Home Area Code. If you make a mistake,
press DELETE button to delete the character on the left of the
cursor.
6. Press OK button to save.
7. Press CANCEL button twice to return to standby mode.
II. SETTING THE LOCAL AREA CODE
1. In BASE MENU, press UP or DOWN
button to search for "EDIT AREA CODE".
2. Press OK button to select.
3. Press UP or DOWN button to search for "LOCAL AREA".
4. Press OK button to select and the unit asks you to enter the
local area code.
5. Press UP or DOWN button to search for the location(s) to
record and store the Local Area Code(s).
6. Press OK button to enter the code. Enter the 3 digits Local
Area Code. If you make a mistake, press DELETE button to
delete the character on the left of the cursor.
7. Press OK button to save.
8. Press CANCEL button twice to return to standby mode.
36570/02252A-1.PUT
5/26/01, 11:35 AM
28
