15
02252A-1
1.
In standby mode, press the handset REDIAL button.
2.
Press UP or DOWN button to select the desired last
telephone number you called. (Figure 12)
3.
Press the handset OK button and the unit will automatically redial the last
telephone number.
B. AFTER HEARING A BUSY TONE WHEN PLACING A CALL
1.
If you get a busy tone, press handset CANCEL button to hang up.
2.
Press the handset OK button and listen for a dial tone.
3.
Press the handset OK button again. This will automatically redial the last
telephone number you called.
C. WHEN THE HANDSET IS OFF THE BASE UNIT AND IN STANDBY MODE
1.
Press the handset OK button and listen for a dial tone.
2.
Press the OK button again. This will automatically redial the last telephone
number you called.
STORING TELEPHONE NUMBERS INTO PHONEBOOK
A total of 20 speed dial names and telephone numbers can be saved into
phonebook on each handset and each handset can have
individual phonebook.
1.
In standby mode, press the handset's MENU button. (Figure 13)
2.
Press UP or DOWN button to search for "PHONE BOOK".
3.
Press OK button to select. The LCD Display shows the first stored telephone
number, name and the record number, otherwise it shows EMPTY REC if
no record is stored.
4.
Press UP or DOWN button to locate an available location to store the new
phone book record.
5.
Press the EDIT button to enter new phonebook record. The flashing line or
cursor indicates that the phone is ready for data entry.
6.
Enter the telephone number you want to store. You can enter up to 14 digits.
Use UP or DOWN button to move the cursor back and forth through the
number entry line. If you make a mistake, press DELETE button to delete
the character on the left of the cursor.
7.
Press the OK button to confirm the entered telephone number.
8.
Enter the name, character by character. You can enter up to 14 characters.
Locate the character on the keypads 0 through 9. See NAME ENTRY TABLE
below. Press once to enter the first character, twice for the second character,
etc. Use UP or DOWN button to move the cursor back and forth through the
name entry line. To create a space between characters and words, press #
or * once after the last entered character. If you make a mistake, press
DELETE button to delete the character on the left of the cursor.
36570/02252A-1.PUT
5/26/01, 11:35 AM
16
