25
Troubleshooting
This section provides a list of the more frequently encountered pressure washer malfunctions, their causes, and
corrective actions. Some corrective actions can be performed by the operator or maintenance personnel,
and others may require assistance of a qualified Service Center.
ENGINE WILL NOT START
Causes
Solutions
Low oil shutdown
Fill engine with the adequate amount of oil
Low water shutdown
Fill water tank with adequate water.
Cold engine
Choke engine to start
No fuel
Add gas to fuel tank. Make sure fuel shutoff valve is open
Pressure build-up from initial use
Trigger spray gun to relieve pressure
Engine not turned ON
Place ON/OFF switch in the ON position
Spark plug wire not attached
Attach spark plug wire to spark plug
LOW/SURGING PRESSURE
Causes
Solutions
Insufficient water supply
Increase water flow, check for kinked or pinched hose
Plugged line filter
Pull out and clean screen carefully
Need to use high pressure nozzle
Change to the green, yellow, white, or red nozzle
Plugged nozzle
Remove nozzle, check for blockage
Worn nozzle
Replace nozzle
Leak in high pressure line
Fix leaks
Содержание 990994
Страница 26: ...26 Parts Explosion Model 990994 Rev A 2 ...
Страница 28: ...28 Pump Exploded View Cat 2SF35GS ...