NorthStar 990994, Руководство пользователя

Страница: 19 / 32

19
Operation
Procedure:
1. Insert one of the high-pressure spray nozzles
(always relieve system pressure first and follow
instructions for attaching a nozzle).
2. Clear the cleaning area of all persons. Keep
children and pets away.
3. Hold the spray gun firmly with two hands and a
sturdy stance -- Gun kicks back when triggered.
4. Wash from the bottom to the top, using side-to-
side motions. This washes away heavy dirt as
you work toward the top.
5. Use the width of the spray pattern to wash a wide
path. Overlap spray paths for complete coverage.
6. The nozzle should be 12" to 24" from the work,
closer for tough areas.
7. Small parts should be washed in a basket so the
pressure does not push them away. Larger,
lightweight parts should be clamped down.
8. The pressure washer is set and locked to the
maximum rated pressure when it leaves the
factory. To reduce the pressure, turn the unloader
knob counterclockwise. To return to maximum
pressure turn knob clockwise.
9. If temporarily interrupting spraying, rotate trigger
safety latch downward to the locked position to
guard against accidental trigger release
Spray Gun Safety Lock
When not spraying, use the spray gun safety lock
to prevent accidental high-pressure discharge.
10. Always turn off the engine and activate spray gun
trigger to relieve system pressure when:
•
the pressure washer is unattended, or
•
disconnecting hoses, installing/cleaning
nozzles, or servicing the pump.
WARNING
Injury
Always turn off the engine and relieve system
pressure when finished spraying or when
leaving pressure washer unattended. Serious
injury could result from unintentional release of
high-pressure spray.
Shutdown
Stop the engine using the following steps:
1. Turn engine OFF.
2. Turn water supply OFF.
3. Squeeze trigger to relieve system pressure.
4. Remove garden hose.
5. Remove pressure hose.
6. Remove nozzle from spray gun.
7. Turn gasoline line valve to the OFF position .
8. Cool engine at least five minutes before storing; a hot
engine is a fire hazard.
WARNING
Warranty Void
Do not attempt to alter the unloader valve's
maximum pressure. Excess pressure could
cause serious injury from escaping high-pressure
fluids and/or pump damage. Any alteration other
than turning the adjustment knob will void your
warranty.
WARNING
Injury
Never disconnect the high-pressure hose
from the pump or spray gun while the
system is pressurized. Relieve pressure by
squeezing the spray gun trigger after the
engine is turned OFF.
Unloader
00417
Safety Latch