NorthStar 958, Руководство по установке

Страница: 28 / 50

SECTION SIX: Interfacing the 958 system
Page 24 958 Installation Manual, Rev. A1
Figure 15: NMEA connector pin configuration
Configuring the NMEA output ports
You can set each output port to meet the requirements of devices that conform to the NMEA 0183 or
other data-format specifications: Press
STAR
to display the
OPTIONS/SERVICE INFO
screen, then
press
PORT SETUP OPTIONS
to display the
PORT SETUP OPTIONS
screen. Press
PORT 1 SETUP
or
PORT 2 SETUP
to display a list of data-format control options, as shown below.
TABLE 7: Aux connector pins
Description Wire color Pin
Shield/Gnd brown 1*
Remote On Gnd green 1*
Remote On white 2
NMEA AUX In (B) black 3
NMEA AUX Out (B) orange 4
NMEA AUX Out (A) violet 5
NMEA AUX In (A) blue 6
* Pin 1 on the AUX port requires two connections from the
cable.
The red wire is not connected on the 958 end, and should be
insulated and capped.
For the aux port pin configuration, see Figure 17 on page 32.