NorthStar 941, Инструкция для оператора

Страница: 8 / 10

941/95x GPS Chart Navigators
6 of 8 Waypoint/Route Sharing & Color Palette Selection Operator Instructions Rev. C
3. Press the
IMPORT/EXPORT
menu key to display the
IMPORT/EXPORT
screen.
4. Press the
EXPORT DATA
menu key to display the
EXPORT DATA
screen. The status bar in the
center of the screen displays the message
READY TO TRANSFER
to show that the transfer is
ready to start.
5. Before transferring, check the communication link between the two units by pressing the
TEST
COMM
key. If the status bar now displays the message
REMOTE LINK OK
, you may begin to
transfer waypoints.
6. To move waypoints and routes from the master unit into the other unit, press the
START
key.
The status bar displays the message
TRANSFERRING
and updates every second with the num-
ber of waypoints and routes sent compared to the total quantity to be sent. The progress bar,
located below the status bar, graphically shows the percentage completed.
If there’s a problem with the transfer process, the following messages may appear:
•
If the other unit is off-line, the master unit displays the dialog-box message
TRANSFER
ABORTED BY COMMUNICATION TIMEOUT
and the status-bar message
COMMUNICATION
ERROR
.
•
If the master unit doesn’t contain any waypoints and routes, the master unit displays the
dialog-box message
NO WAYPTS OR ROUTES TO TRANSFER
and the status-bar message
NO
TRANSFER DONE
.