NorthStar 941, Инструкция для оператора

Страница: 6 / 10

941/95x GPS Chart Navigators
4 of 8 Waypoint/Route Sharing & Color Palette Selection Operator Instructions Rev. C
3. Press the
IMPORT/EXPORT
menu key to display the
IMPORT/EXPORT
screen.
4. Press the
IMPORT DATA
menu key to display the
IMPORT DATA
screen. The status bar in the
center of the screen displays the message
READY TO TRANSFER
to show that the transfer is
ready to start.
5. Before transferring, check the communication link between the two units by pressing the
TEST
COMM
key. The status bar should display the message
REMOTE LINK OK
.
6. To move waypoints and routes into this master unit from the other unit, press the
START
key.
The status bar displays the message
TRANSFERRING
and updates every second with the num-
ber of waypoints and routes already received against the total quantity to be received. The
progress bar, located below the status bar, graphically displays the percentage completed.
If there’s a problem with the transfer process, the following messages may appear:
•
If the other unit is off-line, the master unit displays the dialog-box message
COULDN’T GET
REMOTE WAYPT/ROUTE COUNT
and the status-bar message
COMMUNICATION ERROR
.
•
If the other unit doesn’t contain any waypoints and routes, the master unit displays the dia-
log-box message
NO WAYPTS OR ROUTES TO TRANSFER
and the status-bar message
NO
TRANSFER DONE
.
•
If the master unit is completely full of waypoints and routes (no more room available), the
master unit displays the dialog-box message
LOCAL UNIT STATUS ERROR [002] DATABASE
FULL
and the status-bar message
COMMUNICATION ERROR
.