NORTHROP GRUMMAN IR Patara Laser System, Руководство по предварительной установке

Страница: 23 / 23

Chapter 4: Facility Summary
© 2017 Cutting Edge Optronics, Inc. 14 Patara-IR TEM
00
Laser Pre-Installation Guide
Suggested Supplies and Equipment
Desiccant Cartridge
The desiccant cartridge used in the Patara laser head is an industry standard part.
Desiccant supplies can be purchased from NG CEO, or directly from AGM Container
Controls, Inc. telephone number 800-995-5590.

Desiccant cartridge NG CEO part no. 42-228

Refill part number 643665

Refill tool 980412
Chiller Filter
The water filter used for the Patara laser head is 5

m pleated cellulous polyester filter.
The Hydronix pleated 5µm polyester filter, part number SPC-25-1005; available at
multiple online retailers.
Coolant
CEO recommends using a mix of 10% Optishield Plus™ and 90% distilled water. For
European installations use Optishield™ instead of Optishield Plus™.
Optishield Plus™ may be purchased from:

Opti Temp Inc., 231-946-2931, http://www.optitemp.com/ .
The Patara laser requires approximately 2 Gallons of prepared coolant for the system
including the hoses and filter.
Laser Power Meter
Power Capacity: Minimum of 30 W

To protect the power meter, a negative lens (f=-100 mm) with an anti-reflective (AR)
coating at 1064 nm should be installed in front of the power meter