Chapter 2: Laser Head Dimensions, Beam Height, and Mounting Requirements
© 2017 Cutting Edge Optronics, Inc.
8
Patara-IR TEM
00
Laser Pre-Installation Guide
Beam height
The beam height of the Patara laser is 3 inches.
Mounting requirement
The laser has to be mounted on a flat optical table or equivalent bench. There are three
mounting holes that are 0.28 inches (7.1mm) in diameter. Two mounting holes are
located at the back of the laser head and one at the front. There are holes designed for
0.25 inch dowel pins to confine the position of the laser head. These are on the center line
of the laser head: see Figure 2-2.
Weight
The weight of the laser head is approximately 35 pounds (15.9kgs).
