Northern Tool 168650, Руководство пользователя

Страница: 5 / 14

4
GETTING TO KNOW YOUR MEAT SAW/GRINDER
1. Cover
2. Blade Guard
3. Fence
4. Pusher
5. Pusher Locking Knob
6. Sliding Stainless Steel Table
7. Front Access Door
8. Front Motor Access Panel
9. Rubber Feet
10. Steel Stand
11. Meat Grinder Assembly Locking Handle
12. Tube Connector
13. Meat Grinder Intake
14. Stuffer Tool
15. Blade Guard Adjustment Knob
ASSEMBLY
WARNING! Do not plug this unit into a power source until assembly is complete.
To assemble the stand and motor, review the components diagram as shown in Figure 1 and the Parts List
on page 11. You may choose to begin assembling the stand first and gradually add all other components.
The motor housing may be attached last. Once assembled, attach the Rubber Feet to the four corners of the
stand. The feet will help reduce vibration when the saw is in use. NOTE: When installing the Motor
Support Plate (Part # 82), it must angle toward the front, otherwise the motor will not line up properly
with the Drive Wheel in the upper housing. Ignore the holes on top of Part # 95, as they serve no
purpose. Once the stand and motor are assembled, attach to the main body of the saw using three long
bolts, through the three elliptical openings (A) in the Upper Cover (Part # 78).