Northern Stoker 30-30, Руководство пользователя, Страница: 12 / 28

10
The Northern Stoker has one of the easiest and most accurate electronic control systems of any wood
burning outdoor furnace on the market today! With our electronic control system, setting the temperature
for the furnace is easy and does not require a programming course to operate. In addition, our system
monitors and controls the temperature of the combustion chamber far more accurately then our
competitors and thereby giving you a more efficient and comfortable heat source. Simply plug your
furnace into a 15A circuit!
The following will describe the layout and function of the electronic control system on the Northern
Stoker.
ELECTRONIC CONTROL SYSTEM
Electronic Control
System
(A) MAIN POWER 15A FUSE
(E) BLOWER /
SOLENOID 10A FUSE
(B) HIGH / LOW TEMP
ALARM INDICATOR
(F) LOW WATER
ALARM INDICATOR
(C) START PUSH BUTTON
(D) SYSTEM OFF – ON
ILLUMINATED SWITCH
(G) INTERIOR LIGHT
OFF – ON SWITCH
(H) CONTROLLER
(I) TEMPERATURE -
FARRENHEIT
(J) OUT1 INDICATES
BLOWER IS ON
(M) PV INDICATES
ACTUAL MANIFOLD
WATER TEMPERATURE
(N) SV INDICATES SET
TEMPERATURE OF
CONTROLLER
NOTE: This controller has two plug-in
connector cables that MUST be plugged
in.
1. Black cable with black 115V standard
male plug – provides main power to
controller and the auxiliary receptacles on
the bottom of the Electronic Control
System. Please plug into circuit feeding
furnace or in the event of power outage,
into a generator.
2. Black cable with yellow female cord end
– connects to yellow male plug feeding the
blower and solenoid.
Please ensure that both
connectors are plugged in before
your operate the furnace.
(K) LOCKED OUT
CONTROLLER SETTING
BUTTONS
(O) SET TEMPERATURE
UP / DOWN BUTTONS
FOR (M)
(L) CHANGES SET
TEMPERATURE UP /
DOWN BUTTONS (O)
FROM SINGLE DEGREE
INCREMENTS TO 10
DEGREE INCREMENTS