Northern Micro Spirit Q370-AS, Руководство пользователя

Страница: 16 / 123

Before you Proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any component.
▪
Use a grounded wrist strap or touch a safely grounded object or to metal
object, such as the power supply case, before handling components to avoid
damaging them due to static electricity
▪
Hold components by the edges to avoid touching the ICs on them.
▪
Whenever you un-install any component, place it on a grounded anti-static
pad or in the bag that came with the component.
▪
Before you install or remove any component, ensure that the power supply
is switched off or the power cord is detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals, and/or
components.
▪
Onboard LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON or in sleep mode. This is a reminder that you should shut down the system and
unplug the power cable before removing or plugging in any motherboard component. The
system power LED lights up when you turn on the system power, and blinks when the
system is in sleep mode.