Northern Lights M65C13, Руководство оператора

Страница: 50 / 122

Lubrication & Maintenance/500 Hour/12 Month
Continued on next page RG19661,000040D -19-10MAR13-1/2
Remove, Inspect and Clean Engine
Aftercooler Core
IMPORTANT: Initially remove and inspect the
aftercooler core at 250 hour or three month
service interval on a new engine. Then,
remove and clean at every 500 hour or 12
month interval thereafter.
IMPORTANT: Ensure Service Kit RE18060 is readily
available before removing aftercooler core.
Air side seals will be destroyed during core
removal, and RE18060 kit includes required
replacement seals, as well as end cap O-rings.
1. Close sea cocks and drain the sea water system.
2. Loosen clamp (A) and remove air filter.
3. Loosen clamps (B), remove mounting bolt (C) and
remove water line from rear of aftercooler.
4. Remove four cap screws (D) and remove rear cap
and O-ring.
5. Remove clamps (E) and remove hoses from front cap.
6. Remove four cap screws (F), front cap and O-ring.
7. Remove aftercooler core from the rear of the engine.
A—Clamp
B—Clamps
C—Mounting Bolt D—Cap Screws
E—Clamps
F— Cap Screws
RG12190
—UN—25FEB02
Remove Clamp And Air Filter Element
RG12182
—UN—25FEB02
Remove Rear Cap
RG12183
—UN—25FEB02
Remove Front Cap
OM-C3 | 12/6 | 48