Northern Lights M65C13, Руководство оператора

Страница: 27 / 122

Lubrication and Maintenance
OUOD006,0000081 -19-18AUG11-1/1
Lubrication and Maintenance Service Interval
Chart—Propulsion and Prime Power Units
Lubrication and Maintenance Service Intervals
Item
Daily/Before
Every Startup
250 Hour/6
Month
500 Hour/12
Month
2000 Hour/24
Month
Service As
Required
Check Engine Oil Level and Coolant Level
•
Check Sea Water Strainer
•
Check Air Cleaner Dust Unloader Valve & Restriction Indicator
Gauge
a
•
Visual Walkaround Inspection
•
Drain Water From Fuel Filter
• •
Change Engine Oil And Replace Oil Filter
b
•
Service Fire Extinguisher
•
Service Battery
•
Inspect and Replace Zinc Plugs
•
Check Belt Tension and Wear (Manual Tensioner)
•
Check Engine Mounts
•
Replace Crankcase Vent Filter (If Equipped)
•
Clean Crankcase Ventilation Assembly
•
Check Air Intake Hoses, Connections, & System
•
Replace Fuel Filter Elements
•
Check Automatic Belt Tensioner and Belt Wear
•
Check Cooling System
•
Coolant Solution Analysis-Add SCAs as required
•
Inspect and Clean Heat Exchanger Core and Aftercooler Core
(If Equipped)
•
Check Engine Speeds
•
Check Engine Electrical Ground
•
Check Crankshaft Vibration Damper (6-Cylinder)
•
Pressure Test Cooling System
•
Inspect and Repair Sea Water Pump
•
Check and Adjust Engine Valve Clearance
•
Flush And Refill Cooling System
c
•
Test Thermostats
•
Add Coolant
•
Replace Air Cleaner Element
•
Service Dry Air Cleaner Element
•
Replace Alternator Drive Belt
•
Check Front PTO (If Equipped)
•
Bleed Fuel System
•
a
Replace primary air cleaner element when restriction indicator shows a vacuum of 625 mm (52 in.) H2O, or when
reset button has popped up (6068SFM75 / AFM75 only).
b
Change the oil for the first time before 100 hours maximum of (break-in) operation, then every 250 hours thereafter. If
John Deere PLUS-50 or ACEA-E7, ACEA-E6, ACEA-E5 or ACEA-E4 oil is used along with the specified John Deere oil
filter, the oil change interval may be extended by 50 percent to 375 hours.
c
If John Deere COOL-GARD is used, the flushing interval may be extended to 3000 hours or 36 months. If John Deere COOL-GARD
is used and the coolant is tested annually AND additives are replenished as needed by adding a supplemental coolant additive, the
flushing interval may be extended to 5000 hours or 60 months, whichever occurs first.
OM-C3 | 12/6 | 25