Northern Lights LUGGER L6108, Руководство оператора

Страница: 4 / 43

O6108 08/01
2
Introduction
Unit Identifi cation
Model Numbers
Servicing of marine engines and generator sets presents
unique problems. In many cases boats cannot be moved
to a repair facility. Marine engines cannot be compared
to the servicing of automobiles, trucks or even farm
equipment. Failures often occur in remote areas far
from competent assistance. Marine engines are taxed
far more severely than auto or truck engines; therefore,
maintenance schedules must be adhered to more
strictly.
Failures can begin with minor problems that are
overlooked and become amplifi ed when not corrected
during routine maintenance.
As operator, it is your obligation to learn about your
equipment and its proper maintenance. This is not a
comprehensive technical service manual. Nor will it
make the reader into an expert mechanic. Its aim is to
aid you in maintaining your unit properly.
MODELS INCLUDED
This manual covers the operating instructions for:
M6108 marine generator sets,
NL6108 industrial generator sets, and
L6108 propulsion engines.
Fill in the model number of your unit in the blank space provided.
This will give you a reference whenever service or maintenance is required:
Model numbers give unit's application, block model, aspiration and RPM:
Lugger turbocharged-aftercooled marine propulsion
engine. Komatsu 6108 block.
Northern Lights turbocharged 1500 or 1800 RPM
marine diesel generator set. Komatsu 6108 block.
M 6108 QT
Northern Lights turbocharged 1200
RPM marine diesel generator set.
Komatsu 6108 block.
Northern Lights turbocharged-after-
cooled 1500 or 1800 RPM industrial
diesel generator set. Komatsu 6108
block.
M 6108 T
L - Lugger marine propulsion engine Model number of A - Aftercooled (turbo)
M - Northern Lights marine generator set Komatsu engine block D - Naturally aspirat
NL - Northern Lights industrial generator set 6 cylinder, 108 mm bore T - Turbocharged
Q - 1200 RPM
L - M - NL 6108 A, D, T, & Q
L 6108 A
Serial numbers
Figure 1:
Generator set serial number plate.
Your set has three serial numbers :
1
an
engine number stamped on the block,
2
a
generator plate, and
3
a generator set plate.
Use the serial number on the generator set
plate when ordering parts or in correspon-
dence. The generator set plate is found on the
service side of the generator and resembles
Fig. 1
.
NL 6108 A
Figure 2:
Propulsion serial number plate.