Northern Lights LUGGER L6108, Руководство оператора

Страница: 33 / 43

O6108 08/01
ENGINE
PROBLEM POSSIBLE CAUSE RECOMMENDATION(S)
Engine Overheats Defective temperature gauge/sender • Check water temperature with thermometer
and replace gauge or sender if necessary.
Water pump impeller worn/broken • Check impeller and replace if necessary.
(HE Engine)
Engine Knocks Insuffi cient oil • Check dipstick.
• Call your dealer.
Injection pump out of time • Call your dealer.
Below normal engine temperature • Check your thermostats.
• Check water temperature to see if
temperature gauge is working properly.
Engine overheating • See “Engine Overheating” section.
High Fuel Consumption Improper type of fuel • Use correct fuel for temperature.
Clogged or dirty air cleaner • Service air cleaner.
Engine overload • Reduce load.
• Check proper propeller size.
• Remove grass, etc. from bottom of boat.
Improper valve clearance • See your dealer.
Injection nozzles dirty • See your dealer.
Injection pump out of time • See your dealer.
Engine not at proper temperature • Check your thermostats.
• Check water temperature with thermometer
and replace gauge if necessary.
Below Normal Thermostat not working properly • Check thermostat.
Engine Temperature
Temperature gauge • Check water temperature with thermometer.
not working properly
Low Oil Pressure Low oil level • Fill crankcase to proper level.
Improper type of oil • Drain and fi ll crankcase with correct oil.
Partially plugged oil fi lter • Replace fi lter.
High Oil Consumption Break-in period • Oil consumption decreases after break in.
Crankcase oil too light • Use proper viscosity oil.
Oil leaks • Check for leaks in lines around gaskets
and drain plug.
Engine overheats • See “Engine Overheats” in category above.
Troubleshooting
If you cannot correct problems with these procedures, see your Lugger or Northern Lights dealer.
31