North SELEKT BRD, Руководство по эксплуатации

Страница: 10 / 32

INTRODUCTION
May 06, 2020 Page 10 User Manual No: OM-101A EN
SECTION 3 –
INTRODUCTION
3.01
SELEKT Torch Description
This air or water cooled MIG/MAG Manual Welding Torches
are designed for hand Metal Inert Gas welding (MIG) and
Metal Active Gas welding (MAG) welding using MIG/MAG
welding Power Source.
The Torches consist of a variety design elements:
1. Ergonomic, lightweight Handle Design with a solid
handle construction.
2. Trigger Lever extension option on trigger switch to
distance your hand from the weld zone (Binzel
® ) style
only)
3. Cable supported by ball joint and steel spring to re-
duce hand fatigue.
4. CNC machined tips and gas diffusers are 100% com-
patible with OEM MIG Torches.
5. Heavy Duty insulated metal jacketed swan neck with
high conductivity inner copper tube.
6. Improved torch connection housing design with
greater grip.
7. Gold plated spring-pin contacts for optimal contact of
trigger switch.
These elements create a highly reliable and long-lasting
Torch system with minimal maintenance.
The JINAN NORTH WELDING TOOLS ordering numbers,
available accessories, spare parts, and wear parts are
found within this User Manual.
3.02
SELEKT Torch Duty Cycle
The rated duty cycle of the MIG/MAG Manual Welding
Torches, is a statement of the time it may be operated at its
rated welding amperage without exceeding the temperature
limits of the component parts.
60% Duty Cycle at Rated Weld Current - Mixed or CO
2
Gas
6 Minutes Welding
in any 10 Minute Period
4 Minutes Non-Welding
in any 10 Minute Period
3.03
SELEKT Torch Contents
All SELEKT Torches come complete with:
• MIG/MAG Manual Welding Torch
• Contact Tip
• Nozzle
•
User Manual No: OM-101A EN
NOTE 1: JINAN NORTH WELDING TOOLS reserves the right to change, improve or revise the specifications or design of this product
without prior notice. Such updates or changes do not entitle the buyer of this Product previously sold or shipped to the corresponding
changes, updates, improvements or replacement. The values specified in the table below are nominal parameters. An individual Torch
may differ from the below specifications due to in part, but not exclusively, to any one or more of the following; variations or changes in
manufactured components, installation location/conditions.
3.04
SELEKT BZL Torch Specifications
(Refer to NOTE 1)
Part Number SN15F-3E
SN15F-4E
SN15F-5E
SN15FE-3E
SN15FE-4E
SN15FE-5E
SN24F-3E
SN24F-4E
SN24F-5E SN25F-3E
SN25F-4E
SN25F-5E SN26F-3E
SN26F-4E
SN26F-5E SN36F-3E
SN36F-4E
SN36F-5E SN38F-3E
SN38F-4E
SN38F-5E SN40F-3E
SN40F-4E
SN40F-5E SN240F-3E
SN240F-4E
SN240F-5E SN410F-3E
SN410F-4E
SN410F-5E SN510F-3E
SN510F-4E
SN510F-5E
Torch Length (m) 3 = 3 m; 4 = 4 m; 5 = 5 m
Torch Power Connector E = Euro Fitting
Swan Neck Angle (°) 40 45 45 45 45 45 45 45 45 45
Wire Size Range (mm) 0.6 – 1.0 0.8 – 1.2 0.8 – 1.2 0.8 – 1.2 0.8 – 1.6 1.0 – 1.6 1.0 – 1.6 0.8 – 1.2 0.8 – 1.2 1.0 – 1.6
Standardization Administration of
China - Arc Welding Equipment - Part
7: Torches
IEC Standard for Safety - Arc Welding
Equipment -
Part 7: Torches
GB 15579.7-2013
IEC 60974-7:2013
Cooling Method Air Cooled Water Cooled
Operating Temperature Range -10 °C to +40 °C (+14 °F to +104 °F)
Storage/Transportation
Temperature Range
-25 °C to +50 °C (-13 °F to +122 °F)
Relative Air Humidity
During Operating
0% to 90% (at +20 °C ambient air temperature)
Welding Power Rating for MIG/MAG Manual Welding Torch
[+40 °C Air Temperature]
Rated Amps / Duty Cycle using:
CO
2
Shielding Gas
Mixed Shielding Gas
180A/60%
150A/60% 250A/60%
220A/60% 230A/60%
200A/60% 290A/60%
260A/60% 340A/60%
300A/60% 350A/60%
320A/60% 400A/60%
380A/60% 300A/100%
270A/100% 500A/100%
450A/100% 550A/100%
500A/100%
MIG/MAG Torch Maximum Voltage 141 VDC (Peak Welding Voltage)