The HeatmiserNeo Driver
3
Fig. 1 North to Heatmiser Neo
Compatibility with the Heatmiser Neo System
The HeatmiserNeo driver allows North to interface with the Heatmiser Neo underfloor heating and hot
water control system.
The driver connects, via an Ethernet network, to a single Heatmiser neoHub (Fig. 1). The neoHub
supports up to 32 zone devices, including thermostats, time clocks and accessories.
The neoHub zones are polled by the driver for their values. These values are stored and made available as
objects.
Equipment
Heatmiser devices compatible with the driver include:
•
neoHub gateway (1
st
or 2
nd
generation)
•
neoStat thermostats and timeclocks
•
neoAir battery-powered thermostats
•
neoPlug power sockets
Values
Depending on the type of thermostat or timeclock devices connected, each zone typically has the
following values available:
•
Room temperature
•
Floor temperature
•
Standby mode
•
Temperature setpoints
•
Comfort level profiles
•
Time clock times
•
PIN lock
•
Hold
•
Away
•
Output delay
•
Program mode
•
Temperature format
•
Date & time
The HeatmiserNeo system does not generate alarm event messages.
Zigbee
Heatmiser
neoHub
Heatmiser Neo
Devices
IP Network
North device
°C
