INSTRUCTIONS FOR CHILDPROOFING
DELUXE SET 6191
Tools suggested: Phillips screwdriver and pencil (not provided).
Important: Keep these instructions for future reference.
For helpful tips and instructions, please visit our website: www.northstatesind.com or contact our Customer Care
department via email: [email protected] l Phone (763) 486-1754 or Toll Free: (800) 848-8421
Failure to follow these warnings and the instructions could result in death or serious injury.
Read these warnings and the instructions carefully before installing and using this device.
• Adult installation required. Keep small parts away from children during installation.
• Properly store any extra or unused components out of reach of children.
• This device is intended to restrict access by young children to the contents of a cabinet or drawer,
but some children may still be able to defeat it.
• Replace the device if it becomes damaged or broken or fails to function properly.
Installation
Front Installation
Side Installation
Determine install location, front or
side of cabinet / drawer. Clean and
dry inside surface of drawer /
cabinet.
Attach adhesive to both the catch
and tab latch. On the catch, attach
the adhesive to the side with the
hollow rectangular cut out. On the
tab latch, attach adhesive to the
back flat side of the top
rectangular body.
Remove the adhesive backing and
position the catch approximately
1” from the inside top edge of the
drawer / cabinet (Figure 1). Align
the tab latch to engage with the
catch (Figure 2). Once properly
positioned, secure both the catch
and tab latch into place with the
screws provided (Figures 3 & 4).
Step 2:
Step 1:
Install in the front of the
cupboards/ drawers
Install at the side of the
drawers
Operation
Removal
Remove product by applying heat (hairdryer) for about one minute. Gently pull product away from surface.
Note:
Any damage to the property during installation or removal of this product is the sole responsibility of the end user.
Care
Wipe clean with a soft cloth and non-abrasive cleaner.
To use:
Open drawer / cabinet
slightly and press the tab latch down
allowing it to clear the catch and fully
open (Figure 5). When closing the
drawer / cabinet, the tab latch will
engage automatically (Figure 6).
To Disable:
Press down on tab latch
until you hear it click (Figure 7).
Step 3:
A. Screw
B. Catch
C. Tab Latch
D. Catch Adhesive
E. Tab Latch Adhesive
2
11
3
4
5
6
7
7
1
2
3
4
6
5
WARNING:
DRAWER & CABINET TAB LATCHES
Parts included:
A
X108
X18
B
C
D
E
