North Star M157597AG, Руководство пользователя

Страница: 39 / 64

Maintenance & Repair
39
Inspect and maintain your pressure washer as specified below in order to keep it in safe and
optimal working order. Follow all safety rules and recommended maintenance instructions.
WARNING
ALWAYS shut off water supply, bleed water pressure, turn off engine and disconnect the
spark plug before cleaning, adjusting, or servicing the pressure washer. After servicing,
make sure all guards and cover shields are replaced before using.
Maintenance Schedule
Item Frequency
Remove dust/debris accumulation As needed
Inspect fuel system Each use
Inspect spray system Each use
Clean water filter Each use
Check tire pressure Each use
Recharge and maintain battery As specified in Battery Manufacturer's instructions
Perform engine maintenance As specified in Engine Owner's manual
Perform pump maintenance

Change oil after first 40 hours, then every 3
months or 500 hours of use after that.

Check mounting bolts regularly for proper torque.
Maintain burner's fuel filter / water
separator

Drain water as needed

Change filter after every 500 hours of use
Descale coil Annually or more frequently as use and performance
require (see instructions)
Inspect/clean/adjust electrodes Annually
Check/tighten belts Check belt tension after first 24 hours of use, then
routinely with each oil change. Tighten or change
belts as needed.
Inspect/maintain brakes Inspect brakes annually or more frequently as use and
performance require. Clean and replace components
as necessary.
See detailed instructions for each maintenance item below.
(Note: For end-of-the-season storage instructions, see the "Storage" section of this
manual.)
Maintenance & Repair-Detailed Instructions
Follow safety rules Read and follow these safety rules whenever you will be servicing the
pressure washer:

Turn off / relieve pressure first. Always turn off pressure washer and
relieve system pressure before inspection or maintenance. Remove spark
plug or spark plug wire to prevent accidental starting.

Fuel valve off. Turn fuel shut-off valve to OFF position before
transporting or servicing the pressure washer.

Replace guards. Make sure all guards and cover shields are replaced after