5
STEP 4:
Attach the nozzle arm to the boom
mount pivot with (2) 5/16-18 x 3/4”
flange bolts, (2) 5/16 flat washers, and
(2) 5/16-18 flange Nuts.
do not tighten
bolts until
STEP 5
.
STEP 5:
Attach the 3/8” hose barb to the nozzle
arm with the nut as shown.
Do not
tighten
until
STEP 6.
Apply thread sealant on boom nozzle.
Thread the ¼” NPT x 11/16 thread fitting
onto the 3/8” hose barb. Thread on the
nozzle. Tighten finger tight, then 2-2.5
turns for each fitting.
NOTE: Be sure to
point the boom nozzle towards the
ground
.
STEP 6:
Attach boom mount pivot to the ATV
hitch with 5/16-18 x 2” flange bolt, 5/16”
fender washer, and 5/16” hex nut
(do
not tighten).
Adjust the position of the
boom mount so that it is parallel with the
back of the ATV, or perpendicular to the
line of travel. Then tighten the bolted
joint.
5/16-18 X
3
4
" FLANGE BOLT
5/16-18 FLANGE NUT
NOZZLE ARM
BOOM MOUNT
01123
5/16" FLAT WASHER
0 2 3 8 9
