background image

 

 

 

 

17 

Limited Warranty

 

 

 

Dear Valued Customer: 

 

The NorthStar Product you just purchased is built with the finest material and craftsmanship.  Use this product 
properly and enjoy the benefits from its high performance.  By purchasing a NorthStar product, you show a 
desire for quality and durability. 
 
Like  all  mechanical  equipment  this  unit  requires  a  due  amount  of  care.    Treat  this  unit  like  the  high  quality 
piece of machinery it is.  Neglect and improper handling may impair its performance.  Please thoroughly read 
the instructions and understand the operation before using your product. 

 

Limited Warranty 

 

NorthStar shall warranty any

 

piece of equipment manufactured, or parts of equipment manufactured, to be free 

from  defects  in  material  or  workmanship  for  a  period  of  2  years  from  the  date  of  purchase  by  user.  This 
warranty applies to the original purchaser of the equipment and is non transferable. Verification of purchase is 
the responsibility of the buyer. Parts will be replaced or repaired at no charge, except when the equipment has 
failed due to lack of proper maintenance. Any misuse, abuse, alteration or improper installation or operations 
will void warranty. Determining whether a part is to be replaced or repaired is the sole decision of NorthStar. 

 
NOTE: 

Some services performed by parties other than NorthStar may void warranty. 

 

This warranty covers parts only. It will not provide for replacement of complete products due to 
defective parts. Components not manufactured by NorthStar such as engines are guaranteed by their 
manufacturer and can be serviced at factory-authorized locations near you. Any costs incurred due to 
replacement or repair of items outside of a NorthStar approved facility is the responsibility of the buyer 
and not covered under warranty. NorthStar can supply you with the service center location in your 
area. 

 
This  warranty  specifically  excludes  the  following;  failure  of  parts  due  to  damage  caused  by  accident,  fire, 
flood,  windstorm,  acts  of  God,  applications  not  approved  by  NorthStar  in  writing,  corrosion  caused  by 
chemicals,  use  of  replacement  parts  which  do  not  conform  to  manufacturer’s  specifications,  and  damage 
caused  by  vandalism.  Additional  exclusions:  loss  of  running  time,  inconvenience, loss of income, or loss of 
use, including any implied warranty of merchantability of fitness for a specific use. 
 
Warranty does not cover items subject to normal wear such as tires, receptacles or any part subject to direct 
physical  contact  by  the  public.  This  warranty  does  not  cover  any  personal  injury  or  damage  to  surrounding 
property caused by failure of any part.  
 
This  warranty  is  in  lieu  of  any  other  warranty  expressed  or  implied  and  NorthStar  assumes  no  other 
responsibility or liability outside that expressed within this warranty. 
 
Please fill in the following information and have it on hand when you call in a warranty claim. 
 
Customer Number: ______________________________________________________________ 
 
Date of Purchase: _______________________________________________________________ 
 
NorthStar Serial Number: _________________________________________________________ 
 
Item Number: ___________________________________________________________________ 

Содержание 157204



















Отзывы: