background image

M157204B.1

 

 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

Installation, Operation, and Maintenance Manual

 

 

PRESSURE WASHER

C

leans dirty surfaces with high pressure water.

 

 

To the Owner: 

Thank  you  for  purchasing  a  NorthStar  pressure  washer.    Your  machine  is  designed  for  long  life,  dependability, 
and the top performance you demand!  Take time now to read through this manual so you better understand the 
machine’s operation, maintenance and safety precautions.  Everyone who operates this machine must read and 
understand  this  manual.    The  time  you 

take  now  will  prolong  your  machine’s  life  and  prepare  you  for  its  safe 

operation.  Enjoy the exceptional performance of your NorthStar pressure washer, the industry leader! 
The  manufacturer  reserves  the  right  to  make  improvements  in  design  and/or  changes  in  specifications  at  any 
time without incurring any obligation to install them on units previously sold. 

 

Quick Facts 

Engine Oil 

Engine is shipped without oil.  Fill before starting.  
Use SAE 10W-30 motor oil. 

Pump Oil 

Pump is shipped with oil.  Remove the red shipping plug and install vented dipstick. 
Use SAE 30 Non-Detergent oil (item# 4043) for oil changes. 

Water 

Make sure your water flow is 20% higher than the pressure washer’s flow rate.   
Make sure your water is clean and particle free. 

Storage 

Do not allow water to freeze in the pump, hose, or spray gun. 
Add fuel stabilizer to the fuel tank before long term storage.  

Spraying 
Chemicals 

Use any North Star brand or equivalent pressure washer chemicals.   
Use black nozzle.   

Maintenance 
Schedule 

Engine: 

Oil: change after first 20 hours,  then annually or every 100 hours. 
Spark Plug: clean every 100 hrs, replace annually or every 300 hrs. 
Air Filter: clean every 100 hours, replace annually or every 300 hrs. 

 

Pump: 

Oil: change after first 40 hours, then every 3 months or 500 hours. 

Read and understand all manuals before operating.

 

 
 
 
 
 
 

Any Questions, Comments, Problems, or Parts Orders 

Call NorthStar Product Support 1-800-270-0810 

    

 

  

ITEM NUMBER:    157204

 

  

 

  SERIAL NUMBER:

 

 

 

 

®

Содержание 157204



















Отзывы: