Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[email protected] www.northinvent.com
5
3. Product Identification
On the backside there are three markings identifying the Panel PC.
Display Unit (DIU) P/N and serial number
Electronics Unit (ELU) P/N and serial number
Complete Panel PC P/N and service tag number
Upon request we can assign an additional customer specific P/N.
Please see separate document for details about product numbering.
4. Packaging and Delivery
Please check the delivered goods immediately on receipt with respect to damages caused by transportation and inform the
delivering freight carrier immediately, on site, about any visible transport damages. Additionally, inform us immediately in
writing, at the latest within 5 workdays, about any visible transport damages. At reception, the delivery includes the
following items:
Wave PERFORMANCE Monitor (Panel PC)
AC power cable
DC power plug (optional)
DP cable (optional)
5. Mechanical Dimensions
For panel cut out drawings and mechanical dimensions of Panel PCs see data sheets.
6. Compass Safe-distance:
Every panel PC is tested in order to determine the minimum safe distances at which it should be installed from both the
steering and the standard magnetic compasses, so not to significantly affect the accuracy of these compasses. A safe
distance takes into account both the constant effect on a magnetic compass by the presence of magnetic material, but also
any variable effect due e.g., electrical circuits or the opening/closing of drawers or panels. Thus, provided that a Panel PC
is not placed in a position nearer to the center of the magnetic compass than the recommended safe distance, the Panel PC
may be installed or removed without any need for adjustment of that compass.
The safe compass distances are mentioned on every Panel PC and/or in the corresponding datasheet.
