background image

  Operating Instructions and Parts List 

AR142P

3

www.arblueclean.com

o

Peration

1.  Pull trigger on gun.
2.  Turn the “ON/OFF” switch to 

“ON”.

3.  Release trigger.  The pressure 

washer motor will stop running.

4.  To spray again, pull trigger and 

motor and pump will restart.

Note:  Occasionally the motor may 
run for a short time to bring fresh, 
cool water into the pump even if 
the trigger is released.  This is part 
of normal operation and will not 
damage the unit.

Always turn 
the “ON/OFF” 

switch to “OFF” then trigger gun 
to release hose pressure before 
unplugging the power cord.

Risk of equipment 
damage.  Always 

make sure the “ON/OFF” switch 
on the unit is “OFF” and unit is 
unplugged prior to storage.

Risk of Injection.  
Unit will start 

spraying when trigger is squeezed 
if “ON/OFF” switch is in “ON” 
position.  Always point gun in a 
safe direction.

Save These Instructions

When using this product, basic 
precautions should always be 
followed, including the following:

1.  Read all instructions before 

i

MPortant

 S

afety

 i

nStrUctionS

using the product.

2.  Always disconnect power 

before disassembling or 
repairing the unit.

3.  Follow all safety codes as well 

as the Occupational Safety and 
Health Act (OSHA).

4.  Ensure safety devices are 

operating properly before each 
use. DO NOT remove or modify 
any part of the gun or unit.

5.  Know how to stop this product 

and bleed pressure quickly.  Be 
thoroughly familiar with the 
controls.

6.  Stay alert - watch what you are 

doing.

7.  Do not operate the product 

when fatigued or under the 
influence of alcohol or drugs.

8.  Keep operation area clear of all 

persons.

9.  Do not overreach or stand on 

unstable support.  Keep good 
footing and balance at all 
times.

10.  Follow the maintenance 

instructions specified in the 
manual.

11.  This product is provided with a 

ground fault circuit interrupter, 
GFCI, be sure to inspect cord 
and GFCI prior to use.  Any 
repair or replacement of the 
power cord must be performed 
by a qualified (licensed or 
certified) electrical technician.

12.  Never use an extension cord 

with this product.

13.  The power cord on this product 

contains chemicals, including 
lead, known to the State of 
California to cause [cancer 
and] birth defects or other 
reproductive harm.  Wash 
hands after handling.

Содержание AR142P













Отзывы: